europeanhaa.blogg.se - Mtk imei by cide

MTK IMEI BY CIDE HOW TO
MTK IMEI BY CIDE INSTALL
MTK IMEI BY CIDE DRIVERS

Close the pop-up info window then choose IMEI download from the drop down menu right below the menu bar of the Maui Tool.

MTK IMEI BY CIDE DRIVERS

After successfully installing the drivers the Maui tool will detect your device.

MTK IMEI BY CIDE INSTALL

Now choose update driver software -> Browse my computer driver software -> then browse Android_Gadget_CDC_driver.inf through browse option -> Click next to install driver -> Choose install it anyway -> done. Locate CDC in device manger list and right click on it.

Go to Control panel -> Device manager, locate CDC… (The CDC… option will be displayed until the device is connected in META mode, it will disappear after you disconnect it).

MTK IMEI BY CIDE HOW TO

You can Google out how to disable digital signature verification. For Windows 7 and above make sure you have disabled Digital signature Verification. Hop down to the next point to know how to install CDC drivers. If it fails to install any driver, mainly CDC driver you have to manually install it (this driver is mandatory and without it Maui tool will not detect your device).As soon as PC detects the mobile it will start searching for drivers.The device will boot up and stay in boot logo (META mode) and won’t go past it (don’t panic it is normal).Now turn off the device and connect it to pc using USB data cable.Click Options -> Connect smart phone into META mode.Now install Maui META 3G tool then open it after installation. Close the tool, unplug the phone, start and boot into the Android.A green ring will be shown if its flashed well.Press the Download button and re-insert the battery again.The tool will format the partitions and will show a green ring as success.Down button to let the PC detect your phone. Hit Format/OK and then connect your phone through USB cable into PC, remove and plug the battery but don't turn it on manually.

Under Auto Format Flash check Format whole flash except bootloader and uncheck rest (0:57/1:57). It is better to uncheck the recovery in case, the tool doesn't succeed.

If you have custom recovery installed and don't want to replace it, then uncheck it and check the rest of the listed options (partitions).

Once the interface comes up, click Scatter-Loading button and locate the Scatter file there.

Extract this tool, look for Flash_tool.exe and execute it by Right-click -> Run as Administrator.

Download latest SP-Flash Tool and follow the usage guide either from the aforementioned video (using old version of the tool) or from here.

Extract files from downloaded ROM and look for Scatter File.

Download ADB drivers for your device, install them and verify that your device is getting detected.

You can also look at this collection listed at Androidxda. Google for such with details like device model name, chipset, etc.

Download a scatter-based ROM (Stock ROM preferred) for your device.